PPL Series Economic High Rating PP Pleated Water Filters_Pleated Filter_Product_产品_Shanghai Pullner Filtration Technology Co., Ltd

Product

PPL Series Economic High Rating PP Pleated Water Filters

PPL series pleated filter cartridges are made of Polypropylene (PP) membrane. The characteristics of high flow rate and high dirt holding capacity make it economical pre-

Consult Now>

Related parameters
Download

PPL series pleated filter cartridges are made of Polypropylene (PP) membrane. The characteristics of high flow rate and high dirt holding capacity make it economical pre-filter, which is widely used in various fields such as pharmaceutical, electronics, chemical industry, food and beverage, etc. The all-polypropylene structure provides a wide range of chemical compatibility and can filter most acids, alkalis and solvents.

Dimension:

Outer diameter: 2.7" (68.5mm)

Length: 10", 20", 30", 40"

Material Constructions

Filter media	Polypropylene (PP)
Support/Drainage	Polypropylene (PP)
Cage/Core/End caps	Polypropylene (PP)
Seal material	Silicone, NBR, Viton, EPDM

Performance

Removal rating

0.22μm, 0.45μm, 1μm, 3μm, 5μm, 10μm, 20μm, 50μm, 100μm

Maximum Operating Temperature

80℃

Maximum Operating Difference Pressure

4bar/21℃

2.4bar/80℃

Ordering Information

PPL 0100 10 C1 E

Series	Micron	Length	End Cap	Seal Material
PPL	0020=0.2μm	05=5"	C1=226/Spear	E	=EPDM
	0045=0.45μm	10=10"	C2=222/Spear	S	=Silicone
	0100=1.0μm	20=20"	C5=222/Flat	V	=Viton
	0300=3.0μm	30=30"	C6=226/Flat	P	=FEP
	0500=5.0μm	40=40"	C9=DOE
	1000=10μm
	2000=20μm