130mm High Generation Line Wet Process High Flow Membrane Filter Cartridge_Pleated Filter_Product_产品_Shanghai Pullner Filtration Technology Co., Ltd

Product

130mm High Generation Line Wet Process High Flow Membrane Filter Cartridge

The 130mm High Generation Line Wet Process High Flow Membrane Filter Cartridge is mainly used in processes with high flow requirements.

Consult Now>

Related parameters
Download

The 130mm High Generation Line Wet Process High Flow Membrane Filter Cartridge is mainly used in processes with high flow requirements. The 130 series filter can reach the flow requirement of more than 200L/min. The exquisite appearance structure can fully meet the requirements of the equipment for space. The filtration area of a single filter element of more than 2㎡ has the performance of high flow and high dirt holding capacity, which can reduce the number of equipment downtime caused by filter cartridge change-out.

Material Construction

Filter Media

PFL:PTFE(Hydrophobicity) PFLH:PTFE(Hydrophilic)

EPS:PES HPPV:PP

Cage/Core/End Caps

Polypropylene (PP)

Seal Material

EPDM, Silicone, Viton

Performance

Filtration Rating

0.05μm, 0.1μm, 0.22μm, 0.45μm, 0.65μm, 1μm, 3μm, 5μm, 10μm

Maximum Operating Temperature

80℃

Maximum Operating Difference Pressure

4bar/21℃

2.4bar/80℃

Biological Safety

Dissolution Content

＜30mg/10"

＜0.25EU/ml/10"

Ordering Information

130 PFL0020 10 S E

Series	Micron				Length		End Cap Type	Seal Material
130	PFL	PFLH	EPS	HPPV	10	=10"	S=334 Single O-ring	E=EPDM
	0020=0.2μm	0020=0.2μm	0005=0.05μm	0050=0.5μm				S=Silicone
	0050=0.5μm	0050=0.5μm	0010=0.1μm	0100=1.0μm				V=Viton
	0100=1.0μm	0100=1.0μm	0022=0.22μm	0150=1.5μm
	0300=3.0μm	0300=3.0μm	0045=0.45μm	0300=3.0μm
	0500=5.0μm	0500=5.0μm	0065=0.65μm	0500=5.0μm
	1000=10μm	1000=10μm	0120=1.2μm	1000=10μm
				2000=20μm
				4000=40μm
				7000=70μm
				9000=90μm