P-PPF Polypropylene Filter Housing_Filter Housing_Product_产品_Shanghai Pullner Filtration Technology Co., Ltd

Product

P-PPF Polypropylene Filter Housing

The P-PPF series polypropylene filter is made of high-quality polypropylene, which can withstand acid and alkali solutions.

Consult Now>

Related parameters
Download

The P-PPF series polypropylene filter is made of high-quality polypropylene, which can withstand acid and alkali solutions. There is no precipitation of chemical reagents or colorants during use. It is widely used in food, beverages, ultra-pure water and high purity Chemical filtration.

Features and Benefits

•P-PPF series polypropylene filter can meet the flow requirements of different working conditions;

•The filter cartridge interface adopts a double sealing ring structure, which can better ensure the sealing performance;

•Single-point sealing reduces the risk of leakage of multiple cores and multiple sealing points.

Application

Electronics industry cleaning process

Fine chemical filtration

Pharmaceutical Industry

Filtration of deionized water, alcohol and solvents

Material

Filter Housing	Polypropylene
Retaining Ring	Polypropylene
Spanner	plastic
Sealing	Fluorine, EPDM, Viton
Closure Nut	Polypropylene

Operating Parameters

Design Pressure	0.6MPa/25℃
Max. Operating Temperature	35℃

Cartridge Specification

Number	1
Diameter	68mm/83mm/130mm
Length	10"/20"

Maximum Flow Rate of filter Cartridge

Filter Cartridge Length	Maximum Flow Rate (L/Min)
10"	15
20"	30

68/83

Inlet and Outlet (N1/N2)	Inner Teeth：3/4"NPT,1"NPT	222 Connector 226 Connector
Drain Valve (N3)	1/4" NPT
A: Inlet and Outlet Distance	229.5mm
B: Total Height	10"=419mm 20"=677mm
C: Body Diameter	104mm

130

Inlet and Outlet（N1/N2)	40A/50A/65A	334 Connector
Drain Valve (N3)	1/4"NPT
A: Inlet and Outlet Distance	334mm
B: Total Height	10"=430mm
C: Body Diameter	197mm

Ordering Information

P-PPF	01	10	S	A	C1	S	Z
Code	Filter Number	Filter Length	Filter Diameter	Inlet / Outlet	End Cap	Sealing Material	Design Pressure
P-PPF	01 (1 Round)	10=10"	S (Diameter 68)	A (3/4"NPT)	C1 (222)	S= Silicone	Z (0.6Mpa)
		20=20"	B (Diameter 83)	B (1"NPT)	C2 (226)	E=EPDM
						V=Viton
						P=PTFE

Ordering Information

P-PPF130	01	10	C	C3	S	Z
Code	Filter Number	Filter Length	Inlet / Outlet	End Cap	Sealing Material	Design Pressure
P-PPF130	01 (1Round)	10 (10")	C (40A)	C3 (334)	S (Silicone)	Z (0.6Mpa)
			D (50A)		E (EPDM)
			E (65A)		V (Viton)
					T (PTFE)