PLM-PP series polypropylene melt blown filter cartridge adopts the latest technology, so that the entire filter element has very hard mechanical properties, and its compression resistance is more than twice that of ordinary melt blown filter elements. It can be applied to some liquids filtration with high viscosity and high solid content. The melt blown process makes it has high dirt holding capacity and can withstand more impurities. For particulate materials, such as metallic paint, it has a good interception effect and low resistance.
Materials Construction
Filter Media | PP: Polypropylene NY: Nylon |
Cage/Core/End Cap | Center Core: Polypropylene/ Nylon/ Fiberglass reinforced polypropylene |
Diameter | 63mm or Customization |
Performance
Maximum Operating Temperature | 80℃ |
Maximum Operating Differential Pressure | 4bar/21℃ |
2.4bar/80℃ |
Chemical Compatibility
Material | PP | NY | Material | PP | NY |
Benzene | NR | R | Acid | R | NR |
Xylene | NR | R | Alcohol | R | R |
Acetone | R | R | Fat | LR | LR |
Trichloro ethylene | LR | R | Alkali | R | R |
R：Resist
NR：No Resist
LR: Limit resist
Ordering Information
PLM PP 0005 10 C1 S
Series | Media | Micron | Length | End Cap Type | Seal Material | ||||
PLM | PP=Polypropylene | 0100 | =1.0μm | 05 | =5" | C1 | =226/Spear | E | =EPDM |
NY=Nylon | 0300 | =3.0μm | 10 | =10" | C3 | =222/Spear | S | =Silicone | |
0500 | =5.0μm | 20 | =20" | C5 | =222/Flat | V | =Viton | ||
1000 | =10μm | 30 | =30" | C6 | =226/Flat | P | =FEP | ||
2500 | =25μm | 40 | =40" | C9 | =DOE | ||||
7500 | =75μm | ||||||||
10000 | =100μm | ||||||||
15000 | =150μm | ||||||||
Related Products
Online
Professional senior consultants, free online consultation.
Service hours
Monday to Sunday: 8:00-17:00
Telephone
0086-21-57718597
Top
Chinese
English
