EHF series filter element is a large diameter, no center rod, single opening, and with a unique flow in and out of the filter element. Super flow reduces the usage of filter element and filter. A variety of filter membrane materials are available to suit different application requirements.
Product Features:
Large filtration area and high flux
With unique folding technology, the filtering area can reach 3.2㎡/20 inch.
The 40-inch large-flow filter element has a flow rate of more than 60m /h under standard conditions. High throughput and long life.
Multiple choices of membrane materials
PP and PTFE membranes are available. PP membrane material adopts unique multi-layer Nano-fiber folding technology to achieve gradient filtration structure, increase pollution carrying space, greatly prolong service life, thus reducing replacement frequency and system cost.
Multiple length selection
There are 20", 40" and 60" lengths available.
Material and technical parameters:
Filter material: PP/PTFE
Housing/center rod/end cover: PP
Maximum operating temperature: 82℃
Maximum working pressure difference:3.5bar@21℃ (from inside out)
The outer diameter of filter element: 150mm
Flow characteristics:
Type | 20" | 40" | 60" |
Design Flow | 15m3/h | 30m3/h | 45m3/h |
Max. Flow | 30m3/h | 60m3/h | 90m3/h |
Filter Area | 3.2㎡ | 6.5㎡ | 9.5㎡ |
Retention efficiency Table
Scope of particles | Filter Efficiency | ||||||
0.8μm | 1.0μm | 2.0μm | 3.0μm | 5.0μm | 10μm | 20μm | |
≥1μm | 99.89% | 99.82% | 95.00% | 86.97% | 79.86% | 42.23% | 24.38% |
≥2μm | 99.97% | 99.87% | 98.64% | 96.84% | 90.09% | 70.49% | 40.09% |
≥5μm | 100.0% | 99.93% | 99.90% | 99.89% | 99.89% | 99.89% | 99.89% |
≥8μm | 100.0% | 100.0% | 99.97% | 99.20% | 98.88% | 95.25% | 82.42% |
≥10μm | 100.0% | 100.0% | 100.0% | 99.58% | 98.39% | 98.18% | 89.42% |
≥12μm | 100.0% | 100.0% | 100.0% | 99.78% | 99.57% | 98.76% | 97.41% |
≥25μm | 100.0% | 100.0% | 100.0% | 100.0% | 100.0% | 99.34% | 99.14% |
Ordering Information
EHF PP 0500 40 G E
Series | Material | Micron | Length | Structure | Sealing Material | |
EHF | PP | 0100=1.0μm 0300=3.0μm 0500=5.0μm 1000=10μm | 2000=20μm 4000=40μm 7000=70μm 9000=90μm | 20=20" 40=40" 60=60" | G=Strength Out Skeleton S=Plastic Net B=Belt | E=EPDM S=Silicon V=Viton |
PTFE | 0005=0.05μm 0010=0.1μm 0020=0.2μm 0045=0.45μm | 0100=1.0μm 0300=3.0μm 0500=5.0μm 1000=10μm |
Related Products
Online
Professional senior consultants, free online consultation.
Service hours
Monday to Sunday: 8:00-17:00
Telephone
Top